Biting the CF bullet, what am I missing?

Author	Message
BoostSamurai	BoostSamurai posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 34, Visits: 413	Hey guys, I'm about to buy my first ever FG/CF supplies. I've found a local supplier (because shipping chemicals OS is $$$$ and a big NO NO) and have made a list of what I think I'll need to get started, both in terms of FG mould & CF part making. In the future, I will be getting my composite fabric requirements from EC though Could I please trouble you guys to take a look over my list and let me know if there's anything else you think would be essential for a start up and or anything I probably don't need that I have included in my list. Supplies List 105 West System Epoxy Resin 1 ltr 206 Slow Hardener 800 ml PVA Release - 1kg (blue) Demoulding Wax 400gm Respirator Kit A1B1E1K1-P2 - Ammonia Safety Goggles Acetone 5 ltr Isopropyl Alcohol 99% Catalyst for Tooling Gelcoat 500ml Tooling Gelcoat 1 kg Catalyst - 100ml MEKP Polyester Resin for Fibreglass Laminating 1kg Plasticene Light Beige Modelling Clay 4kg Mixing Sticks Paint Brushes Carbon Fibre fabric 2x2 twill 198gms Fibreglass Cloth 130gm Fiberglass Roller 12mmx70mm Brand/product selection is limited, but this is what I have to work with. With the above supplies, I hope to produce some simple wet layup CF parts which, when sold, will enable me to acquire enough funds to move forward to an infusion setup. Thanks in advance JZX World Forums
	Reply Like 2

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

BoostSamurai - 12 Years Ago

Brian_s - 12 Years Ago

BoostSamurai - 12 Years Ago

Warren (Staff) - 12 Years Ago

BoostSamurai - 12 Years Ago

Warren (Staff) - 12 Years Ago

BoostSamurai - 12 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google