Problem need help with carbon wrap

Talk Composites - The Forum for Advanced Composites

Back

Problem need help with carbon wrap

Author	Message
TomDesign	TomDesign posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 454, Visits: 2.5K	This is after i fixed damaged and need rewrap see bad side around its crazy to do by hands and i done lots of stuff only hands but that is to big for me that is why used vacuuming Edited 12 Years Ago by TomDesign
	Reply Like 3
TomDesign	TomDesign posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 454, Visits: 2.5K	everything simple i have to wrap 2 hoods from both sides in carbon that way one side not a problem by hands other side 1 piece around unreal to do with hands. so how i can correct these things after you see i removed vacuming bag and surface like this i brushed dry paper 120 but it can not brush all lines and if im laying new resin on top i see on those places like cutted material lines. can anyone help to save my work and materials with any advise? more then beer is reward!!
	Reply Like 3
morepower	morepower posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 242, Visits: 1.2K	Why are you using a vacuum bag? I think you would be OK doing it the normal way with a resin down then laying the carbon over the top. Then adding carbon and building up layers of resin to build your clear coat or use a clear gel coat over the carbon until you get the correct thickness and then polish up the surface. http://youtu.be/6rTWaV1imzs
	Reply Like 3
TomDesign	TomDesign posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 454, Visits: 2.5K	Hello guys i made hoods with wrap of carbon with vaccuming and bag but like you can see from bag surface from resin become like this and i can not brush it till it dissapearment and if i lay epoxy on top it seems like carbon was cutted like with knife. any help that i can fix that ?
	Reply Like 2