Hy guys. 
I work on a project that requires wraping wooden tapered ellipsoid object in 2 layers of carbon fiber. Carbon is added for stiffness and visual appearence so nice layup is must.

Carbon goes from bottom of part and goes on sides, it doesnt go all the way around.

I have to use wet layup method combined with vacuum so my plan is to:
1. Cover wood with black tinted epoxy
2. Wait for tacky stage and add first layer
3. Add resin to saturate fabric
4. Wait for tacky stage to add other layer
5. Add resin to saturate fabric
6. Place peel ply and breather and use around 20% vacuum to remove excess resin

My questions are:
1. Will 20% vacuum remove excess resin since most of resin reached tacky or beyond tacky stage?
2. Is there anything to change in the process to ensure good bond and appearance?
3. Process is like skinning with carbon only using 2 layers instead of one and using vacuum to remove excess resin. Should I do like plan above or should I do 1 layer, wait it to cure, key whole surface and repeat process for 2nd layer?

Thanks