Complex parts perfectly finished on both sides


Complex parts perfectly finished on both sides
View
Options
Author
Message
kerolous Amin
kerolous Amin
kerolous Amin
posted 5 Years Ago HOT
Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)
Group: Forum Members
Posts: 2, Visits: 7
How to get a perfect shiny surface on both sides of complex parts?
Method: vacuum infusion
Materials: carbon fiber, epoxy
Reply Like 2
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Complex parts perfectly finished on both sides
kerolous Amin - 5 Years Ago
     Not really possible with infusion, can only be done with RTM or pre-preg as it requires perfectly matched moulds. If you're doing infusion, the only option is to resurface the back to your desired.....
Hanaldo - 5 Years Ago
     The only option i can think of would be to make two thin shells that you bond together with a slightly foaming resin.
SleepingAwake - 5 Years Ago
     I'm not great with infusion techniques as i use prepreg mainly, and that's the process I use to make matched tooling and parts that have a good surface finish on both sides. Can you elaborate on wha...
scottracing - 5 Years Ago
             something like this tub or the plate both were perfectly surface finished on both sides, I am wondering if it can be accomplished by vacuum infusion and how? In this video, a very thin release-film.....
kerolous Amin - 5 Years Ago
     the easy composite video is wet lay and not infusion, you wont be able to get the resin through a large part without some sort of infusion mesh. You need to look into a different process or change...
scottracing - 5 Years Ago
     the parts you are referring to are made by two seperate infusions on two seperate mould, with gloss finish on outside visible side, then bonded together
matthieutje65 - 5 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2024
Execution: 0.000. 3 queries. Compression Enabled.
Explore
Messages
Mentions
Search