Have done a 3mm pour having removed stones. Don’t want them coming straight thru the underside because of sanding. Will leave it 12hrs now then place the shells back as the resin should be tacky by then.
My thoughts are then to do another 3mm pour just to secure everything and leave for another 12hrs before final pour.
Table depth is 27mm
Any thoughts on this or better suggestions.
First pour done at 9am today and now 4hrs on

Hi

So table now done but struggling to get anywhere near the gloss finish that you see from the original pour before sanding. Have bought the NW1 to try but still a bit cloudy.
I applied the NW1 and used a polisher but on a slowish speed. Put the compound on and used polisher straight away. Have done this twice. Am I doing it wrong? Should I leave the NW1 on for a while before polishing? Not getting the expected results I’d hoped for as yet



match com delete account