Hi !
I wanted to ask a question about the  new degassing system compared to the olds one you were selling at Easy Composites (i had the system with the big pump).
I bought the old one at Easy Composites in 2015 (the one with the big pump)
Is the new lid (with the handle) compatible wirth the ancient system ? Does the new chamber have the same size as the old one ?
Thanks !

The body of the chamber is the same size so if you need a replacement lid from us, it will fit the chamber you have.


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant

+x

 

Warren (Staff) - 7/9/2018 8:15:36 AM

The body of the chamber is the same size so if you need a replacement lid from us, it will fit the chamber you have.

Great, thanks ! I don't need a replacement right now, but it's good to know. I'm happy it's compatible, that leaves an option in case.
Can i glue a handle without harming the lid ? If yes, what glue (Cyano, epoxy, neoprene ?)

We use a specialist tape adhesive for the handles as it is more reliable than liquid adhesives.


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant

It's not something we have for sale as it is used in production of the chambers cut off a roll as needed. 

However if you wanted a handle, we can sell you a handle with the tape pre-attached.  You would then need to just clean the surface and apply the handle. If you would like me to set this up for you, then email me on technical@easycomposites.co.uk with your details and I can get things moving for you.


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant

Yes, that would be great !
Could you tell me how much it would be ?
By the way, are there any cleaning products that should not be used to clean my lid ? i use essence F (sorry don't know the name in english) to clean silicone and don't know how resin stains can be cleaned. (as there was no handle it's stained)
Thanks Warren !

The cost for the handle is £7.80 ex VAT. plus delivery to where ever you are in the world.

IPA is fine on the acrylic lid.  Avoid thinners as they can dissolve the plastic.


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant

Ok for the handle, thank you. Will send you an email.
Sorry, could you tell me what's IPA (I don't know the name in french)
I use white gas to clean silicone stains,  i have just checked on wikipedia, it says it does not attack plastics. Would you recommend it too ?

IPA is Iso-propyl alcohol.


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant