Pin holes in laquar coats

Author	Message
Interloper393	Interloper393 posted 8 Years Ago HOT Topic Details
Group: Forum Members Posts: 90, Visits: 634	Hi guys iv skinned quite a few parts now, all have been sanded with 400 grit and there is no low spots or shiney spots so no pin holes and the piece us perfect... Now I use upon 2k clear, I apply 4 light mist coats and wait 5 mins between coats, followed by a medium coat and a few heavy coats after 15 mins... so why am I getting pinholes in the cleat coat? Iv waited 10 mins between coats and hit it with about 5 heavy coats and the dam things won't go away!
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Interloper393 - 8 Years Ago

Anyone? Need these parts away and ot ain't happening :(

Interloper393 - 8 Years Ago

Can you post photos? It will either be surface porosity or contamination.

Hanaldo - 8 Years Ago

Warren (Staff) - 8 Years Ago

What would you use to wipe over the surface?

Interloper393 - 8 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google