XCR skinning


XCR skinning
View
Options
Author
Message
Shaz
Shaz
Shaz
posted 8 Years Ago HOT
Forum Member (39 reputation)Forum Member (39 reputation)Forum Member (39 reputation)Forum Member (39 reputation)Forum Member (39 reputation)Forum Member (39 reputation)Forum Member (39 reputation)Forum Member (39 reputation)Forum Member (39 reputation)
Group: Forum Members
Posts: 3, Visits: 7
Hi i have just completed the step 11 of the skinning process on my mirror covers. At this stage would it ok to use water with the 120 grit sand paper when flattening he surface for the final coat. 
Also i have got very lunpy rough edges what is the best technique to get them flush right to the edge thank you. 
I will attache pics thank you 
Reply Like 6
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
XCR skinning
Shaz - 8 Years Ago
     Hi Shaz, Yes you can use wet sanding during Step 12. Normally it is not necessary as the sanding...
Warren (Staff) - 8 Years Ago
     Cheers warren much appreciated Kind regards
Shaz - 8 Years Ago
     I have just completed step 12 of the process after using the 240 grit paper i am still left with a...
Shaz - 8 Years Ago
     Yes that should be fine. I would expect to still see some scratches from the 240 grit even after...
Warren (Staff) - 8 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search