Hi all new here looking for help

Talk Composites - The Forum for Advanced Composites

Back

Hi all new here looking for help

Author	Message
Coxo	Coxo posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 39, Visits: 476	The picture in my first post I made a mould off the top face is that the right way to do Also when I put the carbon into the mould would I need to cut the slots in the carbon for it to pull in better I appreciate any info thanks
	Reply Like 2
scottracing	scottracing posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 460, Visits: 5.2K	do you have any pictures? it sounds like you have bridging of the material? you need to ensure that prior to vacuum bagging and curing that the material is in all the female corners.
	Reply Like 2
Coxo	Coxo posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 39, Visits: 476	Yeh I made a mould And I used pre preg 200gms non weave set and I tried 200grm weave set Do I need to use a heavier carbon like 245 grm non weve set to get it to pull in tighter
	Reply Like 2
Dravis	Dravis posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 592, Visits: 1.9K	I'm not sure i quite follow you here? Are you trying to "skin" these vents with 200gsm Twill? OR: Have you made moulds from them .. to wet lay or infuse them in CF 200 gsm .. Pictures of the items that "went wrong" will tell us much more .. "Sapere Aude"... Dare to KNOW! The written word is the only truly efficient vehicle for transmitting a complex concept from mind to mind... 103% of all people do not understand statistics... Do not adjust our mind, theres a fault in reality :-)
	Reply Like 2
Coxo	Coxo posted 9 Years Ago HOT Topic Details
Group: Forum Members Posts: 39, Visits: 476	Hi all I am new here I am try make some carbon Fiber vents but having no joy I have tried 200gm 2x2 twill non weave set And tryed 2x2. Twill 200gm weave Set any info I would. Appreciate Thanks graham Attachments IMG_3678.JPG (395 views, 26.00 KB)
	Reply Like 2