Plug issues


Plug issues
View
Options
Author
Message
67redrocket
67redrocket
67redrocket
posted 9 Years Ago HOT
Supreme Being (413 reputation)Supreme Being (413 reputation)Supreme Being (413 reputation)Supreme Being (413 reputation)Supreme Being (413 reputation)Supreme Being (413 reputation)Supreme Being (413 reputation)Supreme Being (413 reputation)Supreme Being (413 reputation)
Group: Forum Members
Posts: 49, Visits: 486
I made a unimold of a plug today. The plug got bad and also the mold. Does anyone know what can have caused these problems? I have use both the pattern coat primer and the hi gloss on a MDF pattern. 
Reply Like 3
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Plug issues
67redrocket - 9 Years Ago
     Looks like a release problem. I assume you are using Easylease? How did you apply it, how old is it?...
Hanaldo - 9 Years Ago
     Yes I used a 8 month old easy lease. Applyed it with a cloth six times like I always do. 15 minutes...
67redrocket - 9 Years Ago
     It sounds like this was definitely a release failure. How well did you clean the plug before...
Hanaldo - 9 Years Ago
     i always leave the metal seal in the tin and make a small hole in one side so you only get a trickle...
VVS - 9 Years Ago
     The problem can be: 1. Temperature at your workplace (most separators needs >25 C temperature...
ArturK - 9 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search