Dull mould after release

Author	Message
Hanaldo	Hanaldo posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	I would do it for the first 3-5 pulls.
	Reply Like 2
carbon man	carbon man posted 9 Years Ago HOT Post Details
Group: Awaiting Activation Posts: 86, Visits: 1.2K	Where as I apply about 15 coats of wax for first release, do I need do another 15 if I re pollish after the first realese? Cheers
	Reply Like 3
Hanaldo	Hanaldo posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Sounds like a small degree of cross linking occurred. This should occur less as you use the mould more. Polish it up again and redo the wax; when using wax you should reapply it with every pull anyway.
	Reply Like 2
carbon man	carbon man posted 9 Years Ago HOT Topic Details
Group: Awaiting Activation Posts: 86, Visits: 1.2K	As title says really. After polishing the mould to hight gloss shine. Then waxing several times ready for the first part to be layed up. I use a polyester gel coat. The first part come out of the mould ok but my new shiney new mould is now dull? I don't want to pollish again or I will have to go through the coats of realese wax again. Any help thanks.
	Reply Like 3