Where to find High-Temp resin and vacuum-bags?

Talk Composites - The Forum for Advanced Composites

Back

Home
»
Advanced Composites Forum
»
Equipment and Materials
»
Where to find High-Temp resin and vacuum-bags?

Where to find High-Temp resin and vacuum-bags?

Author	Message
Fasta	Fasta posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 468, Visits: 3.5K	Why do you need or want to make your own pre preg? The stuff you can buy ready to go is all great, the manufacturers of it have serious equipment for impregnating the fibre so that it has just the right amount of resin. Fastacraft Facebook page
	Reply Like 5
Davidpetty1988	Davidpetty1988 posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 26, Visits: 89	Gurit or gruit one of the two I think or maybe alchemie they don't do prices online you gotta contact them if you do give me an idea on prices please hope this was helpful Dave Tags High resin temp Edited 9 Years Ago by Davidpetty1988
	Reply Like 4
Keko	Keko posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 5, Visits: 61	If I get it right you need HT resin for making molds. I would recommend you Axson Epolam 2031.I have made several moulds for prepreg and I had no problems. I am curing prepreg on 120ºC.
	Reply Like 8
ChrisR	ChrisR posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 363, Visits: 3K	RE the prepreg: I'm not following what you want, just pick a high temp prepreg that has a 7+ day outlife (or whatever you need) - some even go up to 30 days. If you want to make it yourself then pick a high viscosity resin with a long pot life and a high tg, Huntsman do a prepreg resin range. But consider the following: If you're trying to save money then in reality just buy the stuff - by the time you've got the resin, fabric and backing layers plus factor in your time to make it - just buy it, If you're doing it to prove to yourself you can and want to experiment then carry on and please post the results up
	Reply Like 5
Zekewarg	Zekewarg posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 42, Visits: 241	YES! Thank you! Will try them and perform some stresstesting. Thanks again!
	Reply Like 4
tomzi1234	tomzi1234 posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 40, Visits: 500	maybe http://www.fibermaxcomposites.com/shop/epoxy-systembrr244-h33-p-100213.html?cPath=26
	Reply Like 4
Warren (Staff)	Warren (Staff) posted 10 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	Our Very High Temperature Epoxy resin WILL cure at room temperature so is NOT really suitable for use when making DIY pre-pregs. It can cure at room temperature within 48 hours so you would have a very short outlife if you used it to make a form of pre-preg. Also it may well be damaged during the freezing process and once at room temperature would just be a runny resin again. Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 5
Zekewarg	Zekewarg posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 42, Visits: 241	I checked the site, couldn't work out which ones where temp-curing? Perhaps the EC staff could shed some light on this?
	Reply Like 5
Fasta	Fasta posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 468, Visits: 3.5K	http://www.axson-technologies.com/en/find-product/Laminating-Products/Epoxy-laminating-systems Fastacraft Facebook page
	Reply Like 5
Zekewarg	Zekewarg posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 42, Visits: 241	Seriously, I have now searched for several days and I can find absolutely nothing. Temp-cured epoxy can't be that rare! Nobody with any ideas?
	Reply Like 6