NautiGrip IF spray adhesive

Author	Message
67redrocket	67redrocket posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 49, Visits: 486	Have anyone used this spray tack on carbon fiber and epoxy infusion? How was the result?
	Reply Like 3
carbonfibreworks	carbonfibreworks posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 292, Visits: 4.5K	Hi Redrocket I have not used the product mentioned but have tried most others and you really need to avoid a spray adhesive on the first layer of carbon if you are making a cosmetic part or having the carbon visible as they all impact on the finish of the component to some extent. Chris Carbon fibre works LTD
	Reply Like 3
67redrocket	67redrocket posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 49, Visits: 486	Should diluted epoxy resin from a spray bottle also be avoided on cosmetic parts? How do I then assure that the first layer is filling out every tiny corner in the mould? (I have not done a resin infusion part, will try in the next weeks)
	Reply Like 2
carbonfibreworks	carbonfibreworks posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 292, Visits: 4.5K	Hi Redrocket It helps with complex shapes to use a woven infusion mesh and pull the bag down slowly and push the carbon and stack into place, you can use rounded plastic tools but be careful as you may damage the bag. You can also make and use use silicone intensifiers. Regards Chris Carbon fibre works LTD Edited 10 Years Ago by carbonfibreworks
	Reply Like 2