Connecting tubing


Connecting tubing
View
Options
Author
Message
mattv
mattv
mattv
posted 11 Years Ago HOT
Junior Member (23 reputation)Junior Member (23 reputation)Junior Member (23 reputation)Junior Member (23 reputation)Junior Member (23 reputation)Junior Member (23 reputation)Junior Member (23 reputation)Junior Member (23 reputation)Junior Member (23 reputation)
Group: Forum Members
Posts: 3, Visits: 26
Hi , 
I'm just about to connect 2 half metre lengths of 32mm ID CF Tube using a 300mm length of 28.5mm ID CF Tube inside .
I'm going to use PT326 , but what i want to know is how much of the Structural epoxy to use to make it solid into one piece,
also what type of preparation do i need to do on the tubes .Is it just on the inside of the 32 mm or do i need to sand the outer surface
of the 28.5 tube .
Also any tips on how to get at least 15cm down into the tube to sand ?
Bit of a newbie at all this .
cheers M
Reply Like 3
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Connecting tubing
mattv - 11 Years Ago
     Prep all surfaces to be bonded, so inside of the 32mm and outside of the 28.5mm. Easy enough to...
Hanaldo - 11 Years Ago
     Make double sure your preparation and keying of the surfaces is spot on. Roll wrapped tubes are made...
Warren (Staff) - 11 Years Ago
     That's great, thanks guys , a little bit of experimenting with the glue amounts I guess . What's the...
mattv - 11 Years Ago
     Acetone. I'd give it a wash with soap and water first, then wipe it all down with acetone. Then...
Hanaldo - 11 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search