Molds is it possible to

Talk Composites - The Forum for Advanced Composites

Back

Molds is it possible to

Author	Message
Daz	Daz posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 93, Visits: 651	Fill a mold you intend to infuse from ? I made a mold of a wing When I gel coated it and left over night The flange had dropped a little and unbeknown to me pulled away from the wing Can I fill this It's on the edge prob about 5 mm deep And quite long The part is going to be painted Is it possible to fill with car body filler and infuse from ?? This is the wing and its to the left Which has sagged I suppose the fibreglass wing I moulded from may have sagged a bit when the unimold went off as there quite flimsy ? Edited 12 Years Ago by Daz
	Reply Like 2
neilb	neilb posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 107, Visits: 504	i've repaired the inside of a mould before daz, sanded it, filled it then blocked it flat 2k primer then 2k solid black, put it in the booth and baked it then polished it up, it worked for me
	Reply Like 3
Daz	Daz posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 93, Visits: 651	neilb (10/01/2013) i've repaired the inside of a mould before daz, sanded it, filled it then blocked it flat 2k primer then 2k solid black, put it in the booth and baked it then polished it up, it worked for me Cheers Neil I only need to take a couple of parts from it and don't really want to remake it, Ps did u get out for a drink with ding ? Edited 12 Years Ago by Daz
	Reply Like 2
neilb	neilb posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 107, Visits: 504	not yet but i'll txt him now
	Reply Like 3