Hi everybody,

anyone has experience with Easy lease and platter? I sealed some places of the mould with platter and now I am wondering if I need to use release tape on top of the platter or if I have a chance with easy lease.

Thanks in advance

I'm assuming you mean plaster? If so then no, definitely wont have success using Easylease on unsealed plaster. Needs to be sealed.

As Hanaldo eluded to, the surface would need to be sealed to stand any chance with a chemical release agent and most release agents.  You might have some success with mould release wax as it can seal the pores, but realistically a sealed surface, be it 2 pack paint, or a coat of epoxy, would give you a much better surface and a good chance of release with pretty much any release agent.

Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant