Alright Guys, got another question I cant seem to figure out.

I have made a mold for an access cover for the elise. I want to offer this to companies or Race teams with thier logo indented on the part. Also if possible I would like to use the same mould for diffrent layouts so the lettering on the mould would need to be removable.

Here's my thought, theres this machine my hommies girl uses for scrapbooking. It cuts out perfect little letters from pc font.

I want to tsk these little things about 3mm thick and glue them on to make my mold or part.

This is my insperation:



So I want to put in an indent, I have my blank mould made. Now I want to make a part that says "Carbon Tuner" up the side of the part. I would like to take these letters glue them to the mould then make my part from there. I am pretty sure though these little foam letters would compress so I would have to soak them in a hardener of some sort.

In theroy my part would then have the impression, then I could scrape the letters of my mould and be ready for the next logo/name.

And if you wanted it to be rasied well you would have to put the lettering on the donar part before making the mold.

Sorry for lack of a better picture but it cuts out smaller letters like this. Sorry kid, your gonna be famous some day becasue of this:





If Brute Force Isn''''t working your not using enough...

i think that even if all your edges are beveled, that fabric will have difficulties to conform to all of the forms, but now i dont know about the letters sized, but judging by the picture u gave on first post, they are gonna be quite little.

You would have to force the fabric in every corner once vacuum is applied. Meaning your letters volumes would need to support the pressure you'll give without altering shape, and they would need to be well glued so they dont move while you'r applying pressure. Once again, given that you want 3mm thick letters. Maybe you would have to close vacuum line a few mins before the resin feed, to allow more resin in those "strange" areas. Better have too much resin that bridging.

If it was for me I woudl try by cutting letters from stickers that you.... stick to your mold before you make your composite. Okay, it will be a thin "engraving" but it will still show, and it will be less prone to bridging.

 



 


    A $1000 electronic device will always protect a 10 cents fuse