GSX-R 600 front fender OEM to Carbon! Pictures!

Author	Message
Legoman	Legoman posted 6 Years Ago HOT Topic Details
Group: Forum Members Posts: 29, Visits: 622	My current project. Just trimmed after demoulding not sanded back the mould lines jet and not varnished/polished. Hope you guys will enjoy it!
	Reply Like 7
scottracing	scottracing posted 6 Years Ago HOT Post Details
Group: Forum Members Posts: 460, Visits: 5.2K	fantastic work, what materials did you use?
	Reply Like 5
Legoman	Legoman posted 6 Years Ago HOT Post Details
Group: Forum Members Posts: 29, Visits: 622	+x scottracing - 7/15/2019 8:13:28 AM fantastic work, what materials did you use? Thx buddy! -Easy lease chemical release agent + Meguiar's #8 wax -1st layer:200gm2 twill 2nd layer:300gm2 -+45° biaxial carbon fabric For the first layer I used Aerofix3 adhesive spray for the better comsmetic result, between the first and second layer I used a cheaper one adhesive spray. There are 6 installation point on this part. On the frontside you can see that deep drillpoints. Those are strong enough, but the rear ones (the vertically part of the fender) need one more extra 300gm2 biaxial reinforcement. -IN2 infusion epoxy Hope I could help you! Edited 6 Years Ago by Legoman
	Reply Like 5