Group: Forum Members
Posts: 680,
Visits: 1.9K
|
About 10-20% methylated spirit added to epoxy infusion resin that has been mixed with the correct amount of infusion resin hardener already should be enough to thin the resin sufficiently that it will 'mist' through a trigger press spray bottle. It's not a exact science, just add a few drops at a time until you have a consistency that will spray.
Don't be tempted to use acetone, white spirit or turps. Methylated spirit (denatured alcohol) or 100% alcohol is needed for this.
Matt Statham Easy Composites / Carbon Mods - Technical Sales
|