Group: Forum Members
Posts: 680,
Visits: 1.9K
|
Hi Sebastian,
EasyLease is the right choice on an aluminium mould, in fact it’s perfect for it. I’m surprised you had any release problems, you might need to look at other causes for the problem such as the mould surface (is it too rough from machining?) the application process for the EasyLease or possibly even the shelf life of the release agent (i.e is it old).
Another possible consideration is whether the laminate was fully cured. If not then you’ll get release problems. It’s possible that a heavy aluminium tool took a lot of heating up and so slowed the cure down.
I hope the helps, Matt
Matt Statham Easy Composites / Carbon Mods - Technical Sales
|