Tight corners

Author	Message
Tollaus	Tollaus posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 10, Visits: 21	I am about to start my first resin infusion experiment which is a case with four 90 degrees rounded corners. As I do not want to make a disaster in my first attempt, I would like to know I'd I should adjust the fibre on the mould. Should I use a spray adhesive and try to adjust the fibres at the best or I can risk to vacuum directly? I would like to avoid nasty wrinkles on the outside part. Any suggestion is welcome! Thank you very much in advance.
	Reply Like 2