removing pin holes

Talk Composites - The Forum for Advanced Composites

Back

removing pin holes

Author	Message
scottracing	scottracing posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 460, Visits: 5.2K	rob is that the name for the infamous 'black magic'?? i couldnt remember the company who makes it, but is got me out of $hit on several occasions
	Reply Like 6
Bonobo	Bonobo posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 85, Visits: 1.2K	I would also like to know where to get this product has anybody here tried this? Wiping filler for pores, black http://shop1.r-g.de/item/954200
	Reply Like 7
flamypie	flamypie posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 9, Visits: 45	f1rob (13/05/2015) If you plan to lacquer the part just skim it with APF7 Its a black filler like p38 but made for carbon quick sand an top coat and you cant see the holes Have you got the name of a supplier for the APF 7 this sounds like good stuff and I would like to give it a go.
	Reply Like 6
f1rob	f1rob posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 237, Visits: 4.8K	If you plan to lacquer the part just skim it with APF7 Its a black filler like p38 but made for carbon quick sand an top coat and you cant see the holes
	Reply Like 6
Toffee	Toffee posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 36, Visits: 118	thanks for the tip.
	Reply Like 5
Hanaldo	Hanaldo posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	That's generally the best method, but it's a lot of work given resin doesn't sand easily. Personally I use Duratec topcoat, as it's ability to fill voids is excellent and greatly reduces the amount of time you need to spend on sanding (making it almost redundant). But it isn't cheap.
	Reply Like 6
Toffee	Toffee posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 36, Visits: 118	Hi all, I have made a few parts which have a few pin holes, whats the best/easiest method for removing these, do you just mix a bit of resin with fast hardener and keep applying until the hole is filled and then flat off or is there a better method? cheers Lee.
	Reply Like 6