What's in your workshop??

Talk Composites - The Forum for Advanced Composites

Back

What's in your workshop??

Author	Message
Davidpetty1988	Davidpetty1988 posted 9 Years Ago HOT Topic Details
Group: Forum Members Posts: 26, Visits: 89	Thought I'd create this thread for people to post pictures of their workshop and new and homade tools they use and maybe how and why they use them. for composite projects. I'll start .... This is a steel(looks plastic)Stanley 360° multiangle(it uses a ball joint and is very stable when clamped) soft grip vice I use for holding peices while I cut them with a dremel so I can change the angle of the peice so I'm not using the dremel at funny angles thus getting better cutting control.£21 brand new off eBay :-) steal! https://youtu.be/9GzJ189WSfg YouTube vid is in Russian or something but you can see how it works. Tags equipment tools Workshop Edited 9 Years Ago by Davidpetty1988
	Reply Like 3
Replies
davro	davro posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 300, Visits: 2.2K	Matt you have my interest with this "CNC machining a pattern from model board" as I have just finished building a CNC milling machine with LinuxCNC and have been learning Fusion360 as much as I can, so I hope the CAD/CAM stuff is in Fusion360 David Stevens YouTube: Comment \| Rate \| Subscribe Instagram Composite Projects Body Package for Dax Rush RC Car Touring Body 1/10 Scale
	Reply Like 3
Matt (Staff)	Matt (Staff) posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 680, Visits: 1.9K	Hi Davro, Yes, we'll more than likely use Fusion360 for the CAD. We won't focus too much on the intricacies of the CAD software / GCODE / Router setup (because there are so many options out there) but we will be demonstrating the machining, the finish you can get, board finishing and prep and then creating the composite tools from the board. Matt Statham Easy Composites / Carbon Mods - Technical Sales
	Reply Like 4