Talk Composites - The Forum for Advanced Composites
Back
Login
Register
Login
Register
Home
»
Advanced Composites Forum
»
General Composites Discussion
»
How to make this part/mould??
How to make this part/mould??
Post Reply
Like
2
How to make this part/mould??
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
Goto Topics Forum
Author
Message
Darren
Darren
posted 10 Years Ago
ANSWER
HOT
Topic Details
Group: Forum Members
Posts: 54,
Visits: 916
Im looking for some advice on how to make the part below and mould?
It is a cam chain sprocket cover on a small 160cc engine, Dead flat and 8mm thick..
Is this even possible with the heat/oil??
Reply
Like
2
Reply
Darren
Darren
posted 10 Years Ago
ANSWER
HOT
Post Details
Group: Forum Members
Posts: 54,
Visits: 916
The max temp it gets is 130 deg C so you wasn't far off.
That sounds like a really simple process..will the surface be pin hole free?
Should i oven cure , then post cure up to the 130 deg C?
Reply
Like
3
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
How to make this part/mould??
Darren
-
10 Years Ago
Absolutely, you just need to have a think about how you want to do it. It's a good idea to know...
Hanaldo
-
10 Years Ago
The max temp it gets is 130 deg C so you wasn't far off. That sounds like a really simple...
Darren
-
10 Years Ago
First off... do you know what the back side looks like? The "thickness" seems to me to be a...
Dravis
-
10 Years Ago
On the back side of the part it has a 1mm recess, but i can get away with not needing that on the...
Darren
-
10 Years Ago
But, I am right in thinking the cover is in two parts? .. If thats the case I would get some...
Dravis
-
10 Years Ago
Post Reply
Like
2
Similar Topics
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Facebook
Google
Explore
Messages
Mentions
Search