Expanding foam for mould, solid enough ?

Talk Composites - The Forum for Advanced Composites

Back

Home
»
Advanced Composites Forum
»
Mould Making
»
Expanding foam for mould, solid enough ?

Expanding foam for mould, solid enough ?

Expanding foam for mould, solid enough ?

Author	Message
TURK	TURK posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 101, Visits: 662	Hi all, Anybody used the expanding foam you can buy from the diy stores, in aerosol form. I'd like to know what the difference is between that, and the 2 part stuff available. I understand that the 2 part stuff may be 'closed cell', probably making it harder. But can I get away with using the normal aerosol stuff usually used for insulation purposes ? I'd like to spray it into a form ( female mould ) about the size of a shoe box, then demould the expanded spray foam, and then brush on layers of Pattern-Coat Primer to make it harder to use as a main male mould. TURK Tags expanding foam Insulation Foam mould
	Reply Like 9
Reply
TURK	TURK posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 101, Visits: 662	Thanks Hanaldo, I fully understand mate, I did read some of your posts, sounds like interesting stuff ...... shame all the pictures have gone though, as most of it I don't understand without seeing what's happening ! When I get to my Carbon Fibre parts I'll be back to pick your brains. I may be going about this in a totally unconventional way, but it seems to be working out for me at the moment. The biggest learning curve at the moment is knowing the capabilities of the materials, and what can be achieved ...... and obviously how to use them correctly. And which material to use when. I think once you have mastered that, got your technique sussed, then you should be able to design and fabricate just about anything. ........ next project, extended wheel arches ! TURK
	Reply Like 4

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

Expanding foam for mould, solid enough ?

TURK - 10 Years Ago

It works ok, but I wouldn't recommend it. It collapses lots, so you end up having to spend hours...

Hanaldo - 10 Years Ago

Thanks Hanaldo I was afraid somebody would say that, but not totally surprised. Is it available...

TURK - 10 Years Ago

Smooth-On are pretty global, I'd be surprised if they don't have a distributor in France or at least...

Hanaldo - 10 Years Ago

Thanks Hanaldo, I did find it in the end, the company do 'Smooth-On' products in France if anyones...

TURK - 10 Years Ago

it can be done, I made new wings for my car using the spray foam. Sprayed, trimmed with a saw to...

jaffa - 10 Years Ago

That's great work jaffa ....... amazing what some people can do. Even to undertake such a task, many...

TURK - 10 Years Ago

I think I found a far better supplier in France for 'Smooth-On' stuff, than the one mentioned above....

TURK - 10 Years Ago

thanks for the comments. Expanding foam was the aerosol from building suppliers, in this case...

jaffa - 10 Years Ago

It's always a good idea to lay a fibreglass skin over a foam pattern/plug just so you can then sand...

Fasta - 10 Years Ago

It's always a good idea to lay a fibreglass skin over a foam pattern/plug just so you can then sand...

TURK - 10 Years Ago

Actual PU foam (not the aerosol stuff) is closed cell, so the pattern coat primer won't harden it at...

Hanaldo - 10 Years Ago

Thanks Hanaldo for your time and expertise, very much appreciated. It makes great sense what...

TURK - 10 Years Ago

Apologies, you had mentioned that's what you were doing, I had forgotten. You might just want to...

Hanaldo - 10 Years Ago

Hi Hanaldo, I assume the 'Tg' is the 'Heat distortion temperature' of the resin. No 'Tg'...

TURK - 10 Years Ago

In essence, the HDT rating of a resin is a pretty useless value for most users, as it is the...

Hanaldo - 10 Years Ago

Hi Hanaldo, I hear you, and totally agree ........ but I haven't got to where I am with my...

TURK - 10 Years Ago

Absolutely agree mate, trial and error is all part of the fun! Honestly your project isn't really a...

Hanaldo - 10 Years Ago

Thanks Hanaldo, I fully understand mate, I did read some of your posts, sounds like interesting...

TURK - 10 Years Ago

Hanaldo, Sorry for the late reply. Just wanted to say that I have used expanding foam to make a...

Zedok - 10 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search