Combination of Easy preg and other prepreg

Author	Message
creator	creator posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 9, Visits: 92	Hello to everyone. Easy Composites provide the easy preg system that gives nice finish . For this reason i am thinking that i want to combine it with the prepreg i already have - a 330 gr/m2 unidirectional . So i am thinking of 2-3 layers of my uni and the easy preg on top. My uni cures from 100 to 130 so i can cure the hole part in 100 celcius. Does anyone thing that combining this two prepregs would cause unexpected errors ?
	Reply Like 3
Reply
creator	creator posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 9, Visits: 92	It is prepreg from hecxel. It can have various curing scedules. one example is ramp up till 70.C. Then stay there for about 40 min and then ramp up at 100 for 4 hours or at 130 for 2 hours then cool down. Problem with easy composites prepreg is that it does not have Unidirectional.... So for strength applications it is useless
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

creator - 10 Years Ago

what resin system does the UD utilise? and what is the curing parameters?

scottracing - 10 Years Ago

I would make up a small test sample, if you already have the EC easypreg. ---

Dravis - 10 Years Ago

creator - 10 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google