What to do with these break through's and holes?

Talk Composites - The Forum for Advanced Composites

Back

Home
»
Advanced Composites Forum
»
Pattern and Plug Making
»
What to do with these break through's and holes?

What to do with these break through's and holes?

Author	Message
Bonobo	Bonobo posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 85, Visits: 1.2K	I'm flatting down the gloss pattern coat on this plug with 400 grit and there a few small break throughs and holes in the surface, can i touch these up with pattern coat and re-flat? or maybe just polish out these areas on the mould?
	Reply Like 2
Hanaldo	Hanaldo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Do another coat.
	Reply Like 3
FLD	FLD posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 468, Visits: 2.7K	That! If you touch up bits like that and re-flat you'll end up with a rippled surface. Its nigh on impossible to properly flat touch ups IME. Being a lazy arse I'd be tempted just to polish it up though. If you get a slight change in surface on the mould just run the polisher over that too.
	Reply Like 3
Bonobo	Bonobo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 85, Visits: 1.2K	I've continued flatting the plug and it looks like that is the only break through, so I think I'll polish it, if it does show in the the mould I'll polish it out then. There are a few little pin holes caused possibly by bubbles / fisheyes in the pattern coat also.
	Reply Like 3
Bonobo	Bonobo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 85, Visits: 1.2K	Decided to go with another coat afterall, aiming for perfection.
	Reply Like 3
Brian_s	Brian_s posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 99, Visits: 2.5K	Think of how much work it has taken to get you this far. If you don't go for perfect you will wish you had later. In my view Perfect is just about good enough. Brian.
	Reply Like 2
Bonobo	Bonobo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 85, Visits: 1.2K	Agreed! if i aim for perfect and don't achieve perfection i'll only have to settle for very good!
	Reply Like 3