Preventing fraying


Author
Message
KeyboardWarrior
KeyboardWarrior
Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)
Group: Forum Members
Posts: 4, Visits: 14
Hi there.

I'm going to be constructing a complex shape with the external cosmetic layer of reinforcement being red CF. I've worked out how to cut almost the entire shape as a single large piece (140cm x 70cm to give a rough idea of scale), and with all the cuts being perpendicular to minimise issues with fraying.

However that's not quite perfect, and the item will need two rather more fiddly small pieces to complete, with really precise cuts at odd angles. The concern is that fraying will be impossible to avoid and that those bits will spoil an otherwise perfect cosmetic part. Is there a trick here?

Can I spray a small piece with some sort of glue before cutting that will keep it together without any fraying, and are there any particular pitfalls to look out for to avoid spoiling the cosmetic appearance.

Thanks in advance.
Replies
ajb100
ajb100
Supreme Being (2.6K reputation)Supreme Being (2.6K reputation)Supreme Being (2.6K reputation)Supreme Being (2.6K reputation)Supreme Being (2.6K reputation)Supreme Being (2.6K reputation)Supreme Being (2.6K reputation)Supreme Being (2.6K reputation)Supreme Being (2.6K reputation)
Group: Forum Members
Posts: 346, Visits: 4.4K
One issue I've had in the past with spraying glue on the fabric to avoid fraying is that it also significantly reduces the drape of the fabric, so if it's a complex shape, be careful to only spray where you are going to cut, and lightly too
KeyboardWarrior
KeyboardWarrior
Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)
Group: Forum Members
Posts: 4, Visits: 14
Thanks very much for the helpful replies. I'll give it a go and spray carefully.Smile
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...





Similar Topics

Reading This Topic

Explore
Messages
Mentions
Search