Post curing question

Author	Message
noble350	noble350 posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 11, Visits: 131	Hi, I'm working on my university research. I made a prototype of carbon fiber part. It's like cf strip I made it with wet lay-up process. However I used high temp resin for two ends and EL2 resin for the rest. My question is that high temp. resin needs elevated temperature post‐cure cycle up to 160C while EL2 just to 60C, how can I post cure this? I was thinking after I post cure the whole part according to EL2 procedure, I stick only the two ends in oven and continue post curing up to 160. But I hope someone has another simpler solution Thanks Mohamed Kiari
	Reply Like 2
Reply
Warren (Staff)	Warren (Staff) posted 12 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	As has already been mentioned, you will have a problem of exceeding the glass transition temperature of the EL2 when postcuring the high temperature resin which may well damage the EL2 resin. Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

noble350 - 12 Years Ago

matthieutje65 - 12 Years Ago

noble350 - 12 Years Ago

ChrisR - 12 Years Ago

Warren (Staff) - 12 Years Ago

noble350 - 11 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google