Right mandrel/mold for 90° bent carbon fiber tubes

Talk Composites - The Forum for Advanced Composites

Back

Right mandrel/mold for 90° bent carbon fiber tubes

Author	Message
zeiss	zeiss posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 8, Visits: 30	Hi all, i'm buying some carbon fiber sleeves like the one in the image.. roughly 20 cm right + a 90° curve + another 20 cm right with the diameter of 21 mm. Upon your opinion what's the best and simple mandrel to create.. A copper tube rounded with pipe insulation foam...? I read in some article that it could be the right solution.. I think only that it should not be so easy to take out the copper tube once the carbon fiber is cured.. I imagine a different solution, the opposite of the previous one. I would like to try to use a rubber hose of roughly 45 cm ( those used to water the garden). I do not know the technical term (I'm not native English speakers ..) The outer diameter of the pipe must be equal to that which you want to obtain less the thickness of the sleeve of carbon fibers. Then I would insert each of the two ends of the rubber tube two pieces of an adequate diametered rigid tube (aluminum stainless steel ...) for a length of about 15 centimeters into the rubber hose... Then I subdue the rubber tube by holding the ends of the two metal tubes and would insert it into a kind of template that keep it fixed and positioned so as to create the shape I wish. I_ once the carbon fiber is cured... i think that it could be more easy to take off the carbon fiber tube the mandrel.. First i could take off the metal pipe from the rubber hose..it should be easier than the first idea.. Tha pipe are straight... Then taking off the rubber hose from the carbon fiber tube created it should be not so difficult because rubber i think it's more easy to go in the curves than copper.... :-) What do you think about my idea...? It might work ..? This will be my first attempt in the world of composites .. Do you have any different ideas or suggestions..? Thank you very much for taking the time in answering. Attachments Curved tubes.jpg (2.9K views, 98.00 KB) Tags Carbon fiber curved tube mandrel sleeve tube
	Reply Like 5
Reply
zeiss	zeiss posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 8, Visits: 30	Hi, i find this silicone pipe that could be nice for use as a mold/mandrel (whit a metal tube inside in the right part to mantain it straight) That's because i've read that resin do not stick to silicone .. The question is... Is true or it is anyway better to use a release agent, and in the case you suggest to use in any case a release agent .. which one can be the most suitable for a silicone tube ...? thank you very much for your useful help.
	Reply Like 5

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Right mandrel/mold for 90° bent carbon fiber tubes

zeiss - 12 Years Ago

With a curved pipe like that, a flexible material in the middle is pretty much your only option as...

Warren (Staff) - 12 Years Ago

Thank you very much Warren for your reply..! I agree with your thought.. As you have some time...

zeiss - 12 Years Ago

For ease of use id go with the 40mm because its easier to contract braided sleeve than it is to...

Warren (Staff) - 12 Years Ago

Ok.. Thank you Warren for your reply..It's clear.. 1) It's a little more difficult to work with...

zeiss - 12 Years Ago

Hi, i find this silicone pipe that could be nice for use as a mold/mandrel (whit a metal tube...

zeiss - 12 Years Ago

Theoretically those figures look about right. How close you get in practice could vary slightly....

Warren (Staff) - 12 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Right mandrel/mold for 90° bent carbon fiber tubes

Right mandrel/mold for 90° bent carbon fiber tubes

Merge Selected

Threaded View

Similar Topics

Reading This Topic

Login

Explore

Messages

Mentions

Search