quick question for you guys. What resin/gelcoat system are you using on your made of polyester gelcoat? i have made a mold for a mirror part using polyester system but the problem i'm having is that i'm using epoxy for the infusion and my part always get stuck on the mold no matter how much i wax the mold. with the last part i puller from the same mold i applied pva and again there was a bit if sticking but the finishing on the part was not that great

Uni-Mould then Easy Lease. All my work is Infusion and after 5/6 applications of Easy Lease on a new mould I can get 8/9 pulls from the mould before I have to re apply the Easy Lease.