PX90 Enigne mounts

Author	Message
Darren	Darren posted 5 Years Ago HOT Topic Details
Group: Forum Members Posts: 54, Visits: 916	Attemping to make some enigne mounts, but not having much luck with urethane bonding to the metal. Previously used Polytek PT flex, which didnt bond. Does PX90 bond to metal very well? Or would it best to cast slightly oversized bushes and press them in?
	Reply Like 6
Replies
Hanaldo	Hanaldo posted 5 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	You need a special primer to get a very good bond to metal.
	Reply Like 5
Massimiliano	M Massimiliano posted 5 Years Ago HOT Post Details
M Group: Forum Members Posts: 167, Visits: 1.1K	+x Hanaldo - 5/25/2020 2:40:08 AM You need a special primer to get a very good bond to metal. Hi Hanaldo,.which one do you recommend?
	Reply Like 6

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

PX90 Enigne mounts

Darren - 5 Years Ago

You need a special primer to get a very good bond to metal.

Hanaldo - 5 Years Ago

Hi Hanaldo,.which one do you recommend?

mporta71 - 5 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google