Closed container

Talk Composites - The Forum for Advanced Composites

Back

Closed container

Author	Message
Damien	Damien posted 6 Years Ago HOT Topic Details
Group: Forum Members Posts: 32, Visits: 132	Dear all, I am looking for making a closed carbon container (I will then make a hole in there to glue a connector for a tubing)...what strategy would you suggest ? 2 times 1/2 the container and then glue it with Voodoo glue ? Or the entire thing without one of the sides that will be glued afterwards ? Thanks for your help !
	Reply Like 2
Replies
oekmont	oekmont posted 6 Years Ago HOT Post Details
Group: Forum Members Posts: 550, Visits: 27K	Both is possible. The premium solution would be to laminate in a 2part mould and insert a bladder before closing the mould. Then inflate the bladder through the connector hole.
	Reply Like 2
Damien	Damien posted 6 Years Ago HOT Post Details
Group: Forum Members Posts: 32, Visits: 132	+x oekmont - 4/23/2019 3:37:08 PM Both is possible. The premium solution would be to laminate in a 2part mould and insert a bladder before closing the mould. Then inflate the bladder through the connector hole. Sounds like a good idea ! What kind of material do you use for a bladder ?
	Reply Like 2
Lester Populaire	L Lester Populaire posted 6 Years Ago HOT Post Details
L Group: Forum Members Posts: 311, Visits: 13K	+x Damien Coudreuse - 4/23/2019 5:27:04 PM +x oekmont - 4/23/2019 3:37:08 PM Both is possible. The premium solution would be to laminate in a 2part mould and insert a bladder before closing the mould. Then inflate the bladder through the connector hole. Sounds like a good idea ! What kind of material do you use for a bladder ? vacuum bag works. silicon bladders are nice for multiple pulls.
	Reply Like 2