Glasscast 50. Pouring onto an already cured river table

Talk Composites - The Forum for Advanced Composites

Back

Glasscast 50. Pouring onto an already cured river table

Glasscast 50. Pouring onto an already cured river table

Author	Message
Dsully	D Dsully posted 6 Years Ago HOT Topic Details
D Group: Forum Members Posts: 5, Visits: 19	Hi guys. I've just poured my first river table with some nice oak. I Maybe didn't leave enough time between pours as the temperature is 13/14 degrees. It was probably too sticky still. Anyways its shrunk and I need more resin to Complete the table. It's my first time ever working with resin. If anyone has tips about pouring onto an already cured river would be greatly appreciated. Be it sanding etc. Thanks, Daniel
	Reply Like 5
Reply
Dsully	D Dsully posted 6 Years Ago HOT Post Details
D Group: Forum Members Posts: 5, Visits: 19	+x Warren (Staff) - 2/8/2019 11:23:16 AM Wipe down with a damp cloth will remove any dust, however an IPA wipe or acetone will work well especially if there is any other dirt. Cheers mate
	Reply Like 5

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

Glasscast 50. Pouring onto an already cured river table

Dsully - 6 Years Ago

I had a similar issue a few weeks back so you should be able to find my post easy enough. Temp should be 20 degrees for glasscast 50. Will be fine though so just scratch it up with some 240 grit paper

Bhamoggy - 6 Years Ago

Thanks for your response mate. Temperature not convenient alright its averaging around 14. Its under my house so have no choice really. Next one will be better. 240 grit it is👌👌👍👍

Dsully - 6 Years Ago

Hi Dsully, As I'm sure you know, the best option is actually to pour subsequent layers when the previous has reached the 'B' or 'Tack' stage of cure whereby the resin feels tacky to the touch but,...

Rich (Staff) - 6 Years Ago

Thanks alot for the advice Rich, much appreciated 👍

Dsully - 6 Years Ago

Hi mate, what would you recommend to Clean it with after removing the dust

Dsully - 6 Years Ago

Wipe down with a damp cloth will remove any dust, however an IPA wipe or acetone will work well especially if there is any other dirt.

Warren (Staff) - 6 Years Ago

Cheers mate

Dsully - 6 Years Ago

hi, i did my first river table and left to dry for a week. its 30 mm deep, i did it in 3 pours. top seemed dry and hard but when i flippy the work over to remove the plastic sheet i had laid it on it...

Graham Burdett - 4 Years Ago

First of all try and get some heat onto the area to try and see if heat helps it cure off better. If not, if its just surface tack, purple methylated spirits can help remove the tack. Failing that yo...

Warren (Staff) - 4 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search