Stickers between layers

Talk Composites - The Forum for Advanced Composites

Back

Stickers between layers

Stickers between layers

Author	Message
Jas1712	J Jas1712 posted 7 Years Ago HOT Topic Details
J Group: Forum Members Posts: 6, Visits: 69	Hi, Im jut about to skinning some part from my motorcycle, my cuestion is that I can apply some stickers before the final coat, like the Ducati and some lines. This is a great place, congrats for the great job that you're doing.
	Reply Like 4
Reply
Dravis	Dravis posted 7 Years Ago HOT Post Details
Group: Forum Members Posts: 592, Visits: 1.9K	And take pictures :-) "Sapere Aude"... Dare to KNOW! The written word is the only truly efficient vehicle for transmitting a complex concept from mind to mind... 103% of all people do not understand statistics... Do not adjust our mind, theres a fault in reality :-)
	Reply Like 3

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

Stickers between layers

Jas1712 - 7 Years Ago

Has. Hi. I’ve just joined and you thread looks interesting.My project is to improve the look of a sliding load cover in the boot of my kit car. This is the largest job by size that I will have...

Furrari - 7 Years Ago

Hi furarri, wellcome and thanx for the feedback and the support. Back to your project, I'm not sure if I got it right but I think that it will be easier if you can get 2 set of stickers and use one t...

Jas1712 - 7 Years Ago

Executive decision taken. One of the badges is going but I hope to recycle the other. Going for the hole with backing method. All the stuff for vacuum bagging ordered apart from the CF and the...

Furrari - 7 Years Ago

No action yet. Pump is ordered. Samples of CF have arrived along with all the consumables, so just waiting on the pump delivery to make up a board of samples to see which I like best, each piece...

Furrari - 7 Years Ago

Hello Mick. I think that you may need the pre- preg onr, thisCF is best for details and overlap method, this is extremely accurate to cut and work with, you may need a fusion fix to fixed properly......

Jas1712 - 7 Years Ago

+ x [quote] [b] Jas1712 - 6/18/2018 9:23:25 PM [/b] + x [quote] [b]...

Furrari - 7 Years Ago

Jas. I appreciate that pre-preg is the best way to go but I don’t have the facilities to use the stuff so I’m limited to working with infusion or vacuum bagging a wet layup. I think infusion is...

Furrari - 7 Years Ago

I think Jas may have actually meant the ProFinish carbon rather than pre-preg as he mentions using spray adhesive with it which would be totally unnecessary and even detrimental with pre-preg. The.....

Hanaldo - 7 Years Ago

+ x [quote] [b] Hanaldo - 6/19/2018 2:42:33 PM [/b] I think Jas may have actually...

Furrari - 7 Years Ago

Hanaldo.Hi. Yes that be an idea but the carbon/twaron is already on order. I’ve also seen some carbon finish stitched together to form a V. Anyway as I say, I’m a total novice on this subject and ...

Furrari - 7 Years Ago

I bought a set of sample weaves (7 of them) of CF. I used fusion fix to stick them to a piece of ABS andlayered them up with XCR resin mixed 3:1 by weight. Over this I layed peel ply ( white with.....

Furrari - 7 Years Ago

We're on our way. Layer of black base coat. Allowed to cure to a tacky finish. Pro-finish applied in a V patern. Resin coat applied over the top. Vacuum bagged and allowed to cure overnight......

Furrari - 7 Years Ago

I joined this thread as the letters on the Ducati fuel tank so closely matched what I wanted to do.As it was the first time I’d used CF I wanted to do a part that didn’t mater if it went wrong, so I....

Furrari - 7 Years Ago

I stalled out on this, and all the other jobs after injuring my back putting up some more lighting in the composite shop ( the back of the garage).Back to the load floor slider. All the fabric/flock...

Furrari - 7 Years Ago

Yes you're right I meant the pro finish oneI will get it the next week, thanks for get it clear. Cheers and good luck with your project.

Jas1712 - 7 Years Ago

I knew aboya the profinish one when it was to late, i ordered the started kit and the tank required the pro finish one afortunately could save my project but definitely I will try it in my next...

Jas1712 - 7 Years Ago

Yeh don't get me wrong, I wasnt necessarily recommending the ProFinish! I was just pointing out it was more likely that Jas meant that than pre-preg. Personally, I don't actually like set-weave...

Hanaldo - 7 Years Ago

+ x [quote] [b] Hanaldo - 6/21/2018 2:00:12 AM [/b] Yeh don't get me wrong, I wasnt...

Furrari - 7 Years Ago

Hanaldo.No problems. Thanks for the info, I welcome any input. I hadn’t realised that the pro-finish had the antifray finish. As I write the printer is making some brackets for storing roles of.....

Furrari - 7 Years Ago

Were you trying to bond them to the ABS? ABS isn't an easy plastic to bond to, you would need to aggressively stand it with 60 or 80 grit to get any sort of bond. Even then, you would likely find you...

Hanaldo - 7 Years Ago

+ x [quote] [b] Hanaldo - 6/24/2018 10:59:27 PM [/b] Were you trying to bond them to...

Furrari - 7 Years Ago

Hanaldo. Thanks for that info. I was coming to these conclusions myself but it’s good to have some input from those more experienced than me (and that’s just about everybody).Mick

Furrari - 7 Years Ago

You will not have a good time trying to get the profinish into this contours. The backcoating reduces fraying, and eliminates unwanted fibre movement, but at the same time almost fully blocks the...

oekmont - 7 Years Ago

Thanx a lot for that advice, I really appreciate it, I got this results with the normal one, so I'm glad that did the right choice, I was about to order the profinish for this part, you saved my life...

Jas1712 - 7 Years Ago

Can you post a photo? My only thought is that you placed the tow down with the spray adhesive face up, but this is just a guess without seeing it.

Hanaldo - 7 Years Ago

And take pictures :-)

Dravis - 7 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search