Imperfect mould surface.

Author	Message
Tollaus	Tollaus posted 13 Years Ago HOT Topic Details
Group: Forum Members Posts: 10, Visits: 21	Hi guys! I've made the mould for my second piece of the project and its surface came out with a lot of imperfections. I have sanded it but I took off some black gel coat in some parts, so now the polyester resin from the mould is showing up in some spots and the surface isn't decently even yet. I knew the plug wasn't perfect but the mould came out worse than expected. Here are my questions: 1) can I continue to sand until I get a decently even surface, even though the yellow resin is visible? 2) do I need to re apply the gel coat and then sand it again? 3) I need to to even out the surface with bodywork filler and then apply the gel coat again? I do not want to make the mould again, so which is the best way to do it in your opinion? Many many thanks in advance!
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Tollaus - 13 Years Ago

wozza - 13 Years Ago

Tollaus - 13 Years Ago

Warren - 13 Years Ago

Tollaus - 13 Years Ago

wozza - 13 Years Ago

Matt (Staff) - 13 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google