Hi, is it possible to lay a second layer of resin onto a fully cured floor (3-5mm). There are small areas where the resin is a bit thin and wondered if it's possible re-coat these areas with small amount of resin to thicken it up a bit. Or is it a case of having to pour another whole area over the whole floor?....it's about 1.5 metres square? Thanks

Yes you can recoat the floor in patches if needs be.  As the floor has fully hardened, you will need to key the surface with sandpaper to help the resin get a good bond.  Then pour the second layer to fill in the low spots. Once fully cured, you can use wet and dry sandpaper to blend the edges of the new resin in with the old and then bring back to a high gloss using a modern Polishing Compound                                             


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant