|
Group: Forum Members
Posts: 2.5K,
Visits: 28K
|
Oh, never apply a solvent based release agent over a wax release agent! You can apply wax over the Easylease, but not the other way around. The solvents actually dissolve the wax, and the wax contaminates the polymers in the chemical release agent, rendering both useless. You may have got lucky the last time you tried it, or maybe you tried it on some plastic that had good self-releasing properties anyway?? Either way, just swap the order and apply the Easylease first and then the wax.
I would still test that the Easylease doesn't dull the PETG. It may not matter for the PETG part itself, but the finish will be replicated in the mould so it saves a lot of trouble later on.
|