inside diameter of half inch hole

Author	Message
samuw7a	samuw7a posted 9 Years Ago HOT Topic Details
Group: Forum Members Posts: 2, Visits: 11	Hello folks, Trying to coat the inside of a half inch hole about 13/16 deep not sure what the best way to do it is. Any ideas? Sorry I am new to this so forgive me if there is any missing info. Thanks Tags #infusion #hole
	Reply Like 3
Reply
samuw7a	samuw7a posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 2, Visits: 11	The hole is in white maple. 13/16 inches. The part is a propeller blade and the holes are at the root. I would like to line them with 3 layers of carbon fiber like the rest of the part. I had a couple of ideas but have not had the chance to try them yet: 1. mix epoxy and hardner with pieces of the fibre, fill the hole then drill it. 2. turn carbon fiber strands around a dowel or something, fit it in then drill that.
	Reply Like 3