inside diameter of half inch hole

Author	Message
samuw7a	samuw7a posted 9 Years Ago HOT Topic Details
Group: Forum Members Posts: 2, Visits: 11	Hello folks, Trying to coat the inside of a half inch hole about 13/16 deep not sure what the best way to do it is. Any ideas? Sorry I am new to this so forgive me if there is any missing info. Thanks Tags #infusion #hole
	Reply Like 3
davro	davro posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 300, Visits: 2.2K	Hi, Infusion, Hole, that's pretty vague Ok so a few questions ... 1) Firstly what material is the hole in ? 2) The hole is 13/16 deep not sure what this is in mm/cm inches ? or Revelation 13:16 lol 3) You would like to line the hole with resin I presume ... ? 4) Please post a picture of the project/hole if you can ... David Stevens YouTube: Comment \| Rate \| Subscribe Instagram Composite Projects Body Package for Dax Rush RC Car Touring Body 1/10 Scale
	Reply Like 3
samuw7a	samuw7a posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 2, Visits: 11	The hole is in white maple. 13/16 inches. The part is a propeller blade and the holes are at the root. I would like to line them with 3 layers of carbon fiber like the rest of the part. I had a couple of ideas but have not had the chance to try them yet: 1. mix epoxy and hardner with pieces of the fibre, fill the hole then drill it. 2. turn carbon fiber strands around a dowel or something, fit it in then drill that.
	Reply Like 3