Core Materials Explanation for "noobs" ?

Talk Composites - The Forum for Advanced Composites

Back

Core Materials Explanation for "noobs" ?

Core Materials Explanation for "noobs" ?

Author	Message
Lisanty	Lisanty posted 13 Years Ago HOT Topic Details
Group: Forum Members Posts: 3, Visits: 30	hello everyone. i was wondering if you guys from easy composites could exlplain more about this, i´ve being wondering about the uses and aplication of diferent types of Core Materials sorry if it is a stupid question :/ im really curious about this, specially for automotive parts development, which ones/how/where they should be used
	Reply Like 5
Reply
altaran	altaran posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 3, Visits: 19	Hi Easy Composites team, How much does the PVC foam needs to be drilled to be suitable for resin infusion? What diameter and what distance between holes should I use? Would it work if I infuse a first skin on the mould surface, let it cure, remove all bagging consumable but leave the actual skin on the mold, add the foam and infuse the second skin? Will the foam bond well to the first skin this way? I agree using soric would be less hassle but 1.3 kg/m² of resin weight added to the part is non negligible. Best Regards Geofrey
	Reply Like 5

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

Core Materials Explanation for "noobs" ?

Lisanty - 13 Years Ago

Hi Lisanty, There are very many different types of core materials that you can use in a composite...

Matt (Staff) - 13 Years Ago

Matt! thank you soooo much for this information! i really appreciate the work that you guys have...

Lisanty - 13 Years Ago

[quote][b]Matt (Staff) (04/07/2012)[/b][hr]Hi Lisanty, There are very many different types of core...

alebassa - 12 Years Ago

[quote][b]Matt (Staff) (04/07/2012)[/b][hr]Hi Lisanty, There are very many different types of core...

fgayford - 12 Years Ago

Thank you for a really good overview, from me too! Would be grateful for some slightly more specific...

Ian P - 11 Years Ago

Hello guyz! Where can I find a full datasheet for all easycomposites' core materials? I am trying...

MNM - 13 Years Ago

Hi, At the moment we don't have a combined datasheet for all of our different core materials. One...

Matt (Staff) - 13 Years Ago

[quote][b]Matt (Staff) (28/12/2012)[/b][hr]Hi, At the moment we don't have a combined datasheet for...

MNM - 13 Years Ago

Hi MNM, I've created and uploaded a TDS with full mechanical information for the Aluminium...

Matt (Staff) - 12 Years Ago

[quote][b]Matt (Staff) (11/01/2013)[/b][hr]Hi MNM, I've created and uploaded a TDS with full...

MNM - 12 Years Ago

Hi Easy Composites team, How much does the PVC foam needs to be drilled to be suitable for resin...

altaran - 12 Years Ago

Drill it with holes every 2-3 cm. Holes only need to be 2 to 3mm diameter. On the mould contact...

Warren (Staff) - 12 Years Ago

Thank you for your answer ! So I'm looking for 1000 to 2500 holes/ m² plus the channels between...

altaran - 12 Years Ago

I have a basic question on the size naming you have. When you specify 3.2mm, 6.4mmor 19.1mm, do you...

TheEngineer - 12 Years Ago

I have a question about my experience with Soric. I have done an infusion twice with 2mm Soric and...

Farbin Kaiber - 12 Years Ago

Cell size on the honeycomb is centre to centre and is nominal. It would be virtually impossible for...

Warren (Staff) - 12 Years Ago

Thanks!

TheEngineer - 12 Years Ago

I would always bond inserts into the carbon,you could use a large diameter flat washer but inserts...

carbonfibreworks - 11 Years Ago

We were thinking of using aluminium or steel plates as spreaders but even so, I'm still concerned...

Ian P - 11 Years Ago

The best way is to recess the head so it avoids damage when immo acting the ground. Not the target...

ajb100 - 11 Years Ago

You can fill the honeycombs around the hole with a mixture of resin and a compression resistant...

brainfart - 11 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search