Print throu epoxy

Talk Composites - The Forum for Advanced Composites

Back

Print throu epoxy

Author	Message
thanasiss3	thanasiss3 posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 18, Visits: 348	Hi,i make carbon fibre laminates and have the following issues at some parts which get direct sunlight in the hot interior of a car I 'post cure'the parts for some hours at 40celcius under the sun,but it seem the interior get hotter Do i need higher temp post cure to avoid it? This is the part after buffing the clear coat This after the paint through Edited 10 Years Ago by thanasiss3
	Reply Like 2
Reply
Hanaldo	Hanaldo posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	That will depend on your resin system. You'll need to consult your systems TDS.
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Print throu epoxy

thanasiss3 - 10 Years Ago

Yep, much hotter. Post cure at at least 60.

Hanaldo - 10 Years Ago

What type of post cure profile do you suggest?elevated or direct? And how many hours to stay at...

thanasiss3 - 10 Years Ago

That will depend on your resin system. You'll need to consult your systems TDS.

Hanaldo - 10 Years Ago

I use megapoxy 132,the tds is not availiable,the shop where i bought it said it can withstand...

thanasiss3 - 10 Years Ago

Its almost always a "stepped" post-cure cycle .. 2 hours at 40, 2 Hours at 60, 2 hours at 80 ......

Dravis - 10 Years Ago

I backe the parts at an oven with elevated temperature,2hours at 40,2 hours at 60 and 2 hours at...

thanasiss3 - 10 Years Ago

You need to let it cool down again yes. This may take a bit of experimentation without the TDS, as...

Hanaldo - 10 Years Ago

I let the laminated parts to cool down,they get again rock hard,the clearance of epoxy is at higher...

thanasiss3 - 10 Years Ago

Clear coat won't prevent print through if it does reoccur though. If the post-cure doesn't help, you...

Hanaldo - 10 Years Ago

What Tg supposed to be effective for interior parts?hot greek sun can touch 40-45+ at a sunny day!...

thanasiss3 - 10 Years Ago

In the hot sun dark coloured interior parts can get above 60C. The average pain threshold for...

Warren (Staff) - 10 Years Ago

The guy at the shop tell me to slowly raise the temperature and stay at the target temperature for a...

thanasiss3 - 10 Years Ago

Take it in gradual steps for example, 2 hours at 20C, 2 hours at 40C, 2 hours at 60C and then say 6...

Warren (Staff) - 10 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Print throu epoxy

Print throu epoxy

Merge Selected

Threaded View

Similar Topics

Reading This Topic

Login

Explore

Messages

Mentions

Search