hi guys.

so after it comes out of the mould how do we bring it to a shine, g10 and pad or dose it come out with a shine?

thanks guys

In theory, the surface of your part will have exactly the same shine/texture that your mould surface has. Thus the shinier your mould, the shinier the part will be. If your mould is not quite as shiny as you would like, wet sand through all the grits starting at 240-400 up to 2000, then use polishing compounds.

thanks mate very helpful. iv made 2 moulds today and not happy with the shine yet but will wet sand now

andy

No probs mate, after reading my post again i noticed it could cause some confusion. You can wetsand and polish your moulds thats fine.

With the clearcoat I meant the finished part. Do not clear coat the mould.

good luck with your bits!

cheers