By andelise - 6/3/2012 5:25:28 PM
hi guys.
so after it comes out of the mould how do we bring it to a shine, g10 and pad or dose it come out with a shine?
thanks guys
|
By baja_patient - 6/5/2012 12:27:39 PM
No probs mate, after reading my post again i noticed it could cause some confusion. You can wetsand and polish your moulds thats fine.
With the clearcoat I meant the finished part. Do not clear coat the mould.
good luck with your bits!
cheers
|
|