Honeycomb Cell Geometry

Author	Message
jt393	jt393 posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 4, Visits: 15	Good morning, I'm wondering whether you have any information or data regarding the cell geometry of your honeycomb cores, both Nomex and Aluminium? In particular, are they regular hexagons in shape (all sides the same length) and is the cell size measured from one flat side to the opposing flat side, rather than corder to corner or some other measurement? Are there any variations in this in the Nomex and Aluminium you stock, or are they all the same? Thanks for your help.
	Reply Like 8
Reply
jt393	jt393 posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 4, Visits: 15	Thanks Warren, that is a really helpful response - the extra information especially. I am interested in the designed geometry for modelling purposes, so completely understand about the tolerances and that it's never going to be absolutely precise. And the cell size is measured across the cell, as in the dc in the diagram below? http://www.sensorprod.com/news/white-papers/2003_etfs/image02.jpg Thanks again!
	Reply Like 7

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

jt393 - 10 Years Ago

Warren (Staff) - 10 Years Ago

Thanks Warren, that is a really helpful response - the extra information especially. I am...

jt393 - 10 Years Ago

Yes that is correct, the cell size is d c in the picture.

Warren (Staff) - 10 Years Ago

Dravis - 10 Years Ago

jt393 - 10 Years Ago

Warren (Staff) - 10 Years Ago

Dravis - 10 Years Ago

f1rob - 10 Years Ago

Dravis - 10 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google