hi all, i'm having issues with the final part not wetting out enough consistently. I am using the same mould, same layers, same resin and temperature conditions. absolutely no leaks in the bag and obviously the same vac pump. it visually appears to infuse at the same rate every time but only 1/3rd of the time it's actually fully wetting out the weave. it seems to be luck of the draw for me? i'm using a low viscosity resin, pulling a vacuum for at least 40 mins before infusing. i've tried clamping off the vac line and resin line like the easy composites tutorial, i've also tried allowing the resin to almost empty the pottle and only clamping the resin line and allowing excess to reach the catchpot and letting it cure wit vaccuum pump going. also moving around the resin feed/vac lines. i honestly have no idea what the cause is. would appreciate any help here.

when using certain cores you can't pull a full vacuum otherwise it crushes, you use the regulator to control it