Test core material infusion

Author	Message
pahanes	pahanes posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 29, Visits: 20K	1 core layer Lantor SoricXF 3mm. Left 1 layer carbon cloth and right 2 layers on the front side. Concluded: to lay down 2-3 layers of carbon fiber on the front side in order to avoid the impression. p.s. weight plates 20x20 cm = 100 grams ) Lightweight and durable ) Infusion without mesh, without peel-ply. Edited 11 Years Ago by pahanes
	Reply Like 2
Reply
pahanes	pahanes posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 29, Visits: 20K	wozza (02/10/2014) As I don't know the reason for the test this may be an unfair comment but for a core to add any real strength it needs to have balanced layers of reinforcement either side of it, hence the term core. When there is only reinforcement on one side the stack can delaminate under load. Warren Reason for the test - to see whether leaves imprint Soric XF Edited 11 Years Ago by pahanes
	Reply Like 2

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

pahanes - 11 Years Ago

wozza - 11 Years Ago

pahanes - 11 Years Ago

Can delaminate...I'm not sure that this can happen.Should be a big load

pahanes - 11 Years Ago

wozza - 11 Years Ago

I think the test was purely to see how many layers you have to put over soric to prevent print...

ChrisR - 11 Years Ago

[quote][b]ChrisR (02/10/2014)[/b][hr]I think the test was purely to see how many layers you have to...

wozza - 11 Years Ago

Ok. I do the same on both sides :)

pahanes - 11 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google