What to do with these break through's and holes?

Author	Message
Bonobo	Bonobo posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 85, Visits: 1.2K	I'm flatting down the gloss pattern coat on this plug with 400 grit and there a few small break throughs and holes in the surface, can i touch these up with pattern coat and re-flat? or maybe just polish out these areas on the mould?
	Reply Like 2
Replies
Bonobo	Bonobo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 85, Visits: 1.2K	Decided to go with another coat afterall, aiming for perfection.
	Reply Like 3
Brian_s	Brian_s posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 99, Visits: 2.5K	Think of how much work it has taken to get you this far. If you don't go for perfect you will wish you had later. In my view Perfect is just about good enough. Brian.
	Reply Like 2

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Bonobo - 11 Years Ago

Do another coat.

Hanaldo - 11 Years Ago

FLD - 11 Years Ago

Bonobo - 11 Years Ago

Decided to go with another coat afterall, aiming for perfection.

Bonobo - 11 Years Ago

Brian_s - 11 Years Ago

Bonobo - 11 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google