Resin Infusion


Resin Infusion
View
Options
Author
Message
Rick Lloyd
Rick Lloyd
Rick Lloyd
posted 12 Years Ago HOT
Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)Junior Member (11 reputation)
Group: Forum Members
Posts: 1, Visits: 20
Can any one tell me what the max. thickness that can be infused at one time

I need to have a total thickness of 10mm 

can this be done in one shot 

It is all going to be fibreglass and the layup is going to be

2x 80 gram
2x 200 gram
2x 300 gram 90 def
2x 300 gram 45deg
2x 300 gram 90 def
2x 300 gram 90 def
2x 300 gram 45deg
2x 300 gram 45deg

until 10mm is reached and then

2x 80 gram
2x 200 gram
to balance the layup

is this possible any help would be great

Thanks

Rick
Edited 12 Years Ago by Rick Lloyd
Reply Like 5
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Resin Infusion
Rick Lloyd - 12 Years Ago
     Hi! It depends on your resin specification, for ex. mine has max thickness of 12-15mm, check your...
wojtepanik - 12 Years Ago
     I have seen over 50mm infused (not done it myself but had it demonstrated) so as mentioned it...
ChrisR - 12 Years Ago
     As said it depends both on the material and the resin viscosity. With our IN2Epoxy Infusion Resin...
Warren (Staff) - 12 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search