Talk Composites - The Forum for Advanced Composites
Back
Login
Register
Login
Register
Home
»
Advanced Composites Forum
»
General Composites Discussion
»
guys thinking build autoclave ideas from my photo
guys thinking build autoclave ideas from my photo
Post Reply
Like
3
guys thinking build autoclave ideas from my photo
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
Goto Topics Forum
Author
Message
TomDesign
TomDesign
posted 12 Years Ago
ANSWER
HOT
Topic Details
Group: Forum Members
Posts: 454,
Visits: 2.5K
what you guys think is it wortjk my friend sell this it was used for water and etc to store. so i thought i could buy and to ask factory to do doors and to ask other guy who genious with electricity to do heating inside and computer that rise and cool down inside on this canister big? what you think is it great option for autoclave? as normally i asked how much used autoclave so in uk they charged 180.000 euro. i do lotttttttt cheaper. I TRY TO DO INSIDE LIKE ON HOTO NUMBER 2. YOU THINK GOOD IDEA TO BUY SO BIG STORAGE LIKE FROM PHOTO 1? IT IS 3 METRES LONG 1.5 METRE HIGH AND 1.2 METRE WIDTH
any advise or suggestion is welcome.
Edited
12 Years Ago by
TomDesign
Reply
Like
3
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
guys thinking build autoclave ideas from my photo
TomDesign
-
12 Years Ago
for me, it'a a bad idea use the storage in photo. You can ask to a storage factory a new factory...
_GABBER
-
12 Years Ago
yes but why you think this bad idea if welders cut front do doors and everything this can is big and...
TomDesign
-
12 Years Ago
If it's a used storage, probably has rust inside, so the thickness is less of 8 mm. Meanwhile, you...
_GABBER
-
12 Years Ago
photo number 2 is an real factory autoclave on first im think to buy that tank. it cost me with...
TomDesign
-
12 Years Ago
Hi there... Using an old "pressure vessel" or Tank as a homemade "autoclave" may seem like a good...
Dravis
-
12 Years Ago
yes i agree this hold 8 bars. and in good condition. i talked to guy to cut and to do doors to other...
TomDesign
-
12 Years Ago
Hi Tom It looks like a storage tank and not a pressure vessel but either way you can not just sell...
carbonfibreworks
-
12 Years Ago
[quote][b]TomDesign (03/09/2013)[/b][hr]what you guys think is it wortjk my friend sell this it was...
fgayford
-
12 Years Ago
so guys maybe then i order already builded tank? how much preassure and temperature it has to hold...
TomDesign
-
12 Years Ago
To sell them you would need to have proper safety tests done. In fact i wouldnt build a DIY one...
Warren (Staff)
-
12 Years Ago
so warren what you can suggest as a build? as mainly i want to pre preg wings and hoods. normal...
TomDesign
-
12 Years Ago
You don't need an autoclave though if you want to use pre preg, just use an ooac pre preg and build...
ajb100
-
12 Years Ago
£20-30k is still a lot of money. Certainly beyond the "normal" DIYer and small business. Unless you...
Warren (Staff)
-
12 Years Ago
Post Reply
Like
3
Similar Topics
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Facebook
Google
Explore
Messages
Mentions
Search